Tel: 01243 553231   Email: neverfinished0@hotmail.com
www.ReelAudio.Co.UK
The Home for Vintage Analogue Tape Recorder and Specialist Repairs Information
Click this to Return to the Home Page


S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P



S
A
L
E
S

S
H
0
P

The Baldwin HiFi & ReelAudio Product Listings & SHOP
Page Menu (click on a menu item below to take you to the items in the topic)
Tape/Repairs PreAmp RIAA PowerAmp DCPSU ACPSU ACFilter Other Warranty Contact
All items shown below (apart from the Tape machine spares) are custom built in Yapton - West Sussex by Paul using carefully designed and tested circuit boards (in House) - then manufactured by Botech Circuits in Hong Kong. Isn't the Internet wonderful - I send the CadCam files over via email and 10 days later I received Laser Cut circuit boards exactly as I specified. Gone are the days of UV lights, Acid Baths etc.
High Quality components are used throughout and are hand soldered - then tested prior to installation in the equipment. CNC and Laser Engraving work is also done in the workshop ensuring that the unit being built meets the exact customer requirements.
Customised Old School Analogue Technology brought bang up to date.
CE Accreditaion on all units! 110/220VAC options too.
Contact and Warranty Information is shown at the bottom of this page.
If you would like to purchase an item shown below or discuss your particular requirements then please contact Paul by email or telephone. If you are Outside the UK then please contact Paul for a Delivery cost. Thankyou.

Revox/Studer, Teac/Tascam Tape Machine Repairs / Setup
Book a day with Paul and bring your machine to West Sussex so that we may repair and refurbish your Tape Recorder together.
Lots of chat, Tea/Coffee and usually you can take your machine away with a big smile.
Fixed Labour Fee of 145.00 + Parts @ cost for a standard 2 or 4 track Machine.
Multitrack machines - Please ask for a quote.
Example: (A77, B77, PR99 average Price in Total: 185.00 - 200.00)
For Further Information about this service: Click Here
To view Customer Feedback Click Here
Revox Repairs
Baldwin HiFi TMSU5s Tape Recorder Switching Comparator.
I bet you have not seen one of these for a long time - or even maybe before!
External dimensions are Width: 320mm (12.7") Height: 55mm (2.17") Depth: 265mm (10.43").

This is a special switch box that allows up to 5 stereo Tape Machines to be connected to an Amplifier.
By use of the Toggle switches - you can Record to any of the Tape Machines either from the Amplifier Source or indeed from any of the other Tape Recorders.

Back in the 70's and 80's these used to be built for shops to demonstrate the Tape Machines - Today with even better design you can connect all your machines and Tape Dub to your hearts content.

Built in VU meters allow you to monitor the levels - you can also monitor the source & playback of the machine recording through the Amplifier via the top toggles
This is a passive switching unit - so no frequency response interference is induced by this special unit.
220VAC-240VAC to drive the VU meter circuits and lights (you provide the 3 pin Euro Lead).

499.00 + 20.00 Postage in the UK - 40.00 to Europe
For Further Construction Pictures: Click Here
TMSU3409
TMSU3409
Baldwin HiFi T4309-10 10 x Tape Recorder Switching Comparator.
Again, I bet you have not seen one of these before!
External dimensions are 430mm (16.9") Wide x 90mm (3.55") High x 308mm (12.2") Deep.

Connect up to 10 x Tape Recorders and record to all 10 units all at once.
The Play switches allow each Tape machine to be "in charge" as a source - these are wired in a cascade so that only one can be in charge at any one time.
Withh all Play switches UP - the PreAmp becomes the source.

Built in VU meters allow you to monitor the levels - you can also monitor the source & playback of any of the machines recording through your PreAmplifier.
The Tape Machines receive the signal line level source directly - so no frequency response interference is induced in the recording chains by this special unit.
220VAC-240VAC to drive the VU meter circuits and lights (you provide the 3 pin Euro Lead).

799.00 + 30.00 Postage in the UK - 60 to Europe
For Further Information: Click Here
T4309-10
T4309-10

Custom Built Old School / Modern Analogue PreAmplifiers
The Baldwin HiFi EQ2205 - 1 Stereo Input Equaliser Active PreAmplifier
For those who have discovered that a PASSIVE PreAmplifier is a little limited - this EQ unit can sit between the PreAmp and the Power Amp to allow the Bass & Treble Controls to enhance the sound quality as required. Huge sweeps using a 1953 Mullard Transistorised Circuit (modified). Built like a Mixing Desk Stereo Channel - there are Gain, Treble, Bass, Pan and Volume Rotary Controls to give EQ sweeps that will impress! Lighter Treble and Deeper Bass control than you could expect!
External dimensions are 210mm (8.25") Wide x 58mm (2.25") High x 180mm (7.25") Deep.
Supplied with an external Plug-in UK PSU - 310.00 + 16.50 Postage in the UK - 30.00 to Europe
For Further Pictures: Click Here
EQ2205
The Baldwin HiFi MB4309 - A Visual Display Unit Bridge Module
Custom built to your spec - a plugin Meter Bridge Module which has Enormous Old School VU Meters. 2 sets of Stereo RCA Phono connectors so you can install after your PreAmplifier and then connect onwards to the Power Amplifier.
This unit has T90 Meters with switchable Blue LEDs and a centre Graphic (16 display options).
All inputs are adjustable to suit your PreAmplifier Outputs.
External dimensions are 430mm (16.9") Wide x 90mm (3.55") High x 308mm (12.2") Deep.
with Internal PSU - 749.00 + 40.00 Postage in the UK - 60.00 to Europe
For a short video and Further Pictures: Click Here
MB4309
The Baldwin HiFi Pre10MM4307 Active and Passive Wide PreAmplifier with absolutely EVERYTHING you need
10 adjustable & switchable Stereo Inputs - this PreAmplifier has Tape monitor facilities. A super MM RIAA turntable input and Bluetooth Receiver too. This PreAmplifier also has a driven Headphone Output in Active mode which also uses the superb sounding modified 1953 Mullard Transistor circuit.
External dimensions are 430mm (16.93") wide, 70mm (2 3/4") high and 308mm (12.2") deep .
Supplied with an internal UK PSU - 749.00 + 40.00 Insured Postage in the UK - 60.00 to Europe - 110.00 to the USA
For Further Information: Click Here
To view Customer Feedback Click Here
Pre10MM4307
The Baldwin HiFi Pre-Selector-4309 - 6+3+3 + 5x Tape I/O PreAmplifier Extender.
Beautiful Designer Case - 430mm (17") wide x 90mm (3 1/2") high and 308mm (15") deep.
If your PreAmplifier is limited to one MM RIAA input, one Auxiliary input etc - yet you have lots of analogue / digital equipment to plug into the HiFi, more than one Tape Recorder, Cassette Deck, Computer Recording facility and/or CD Recorder - then this unit will 'EXTEND' your PreAmps' capabilities.
It boasts 6 sets of Inputs A, 3 Sets of Inputs B and 3 sets of Inputs C (All transparent to the signal source).
It also has capability to record and replay / monitor 5 separate Recording machines all at once!
Let's say you have 2 or 3 MM Turntables - then Inputs B can be used.
You may have more than one MC Turntable - plug these into Inputs C.
All your other Line Level devices can be plugged into inputs A.
This unit relies on your PreAmplifier have a Tape Input and Tape Output set of Connections!.
Built in VU meters allow you to monitor the levels - you can also monitor the source & playback of the machine recording through the Pre-Amplifier.
This is a passive switching unit - so no frequency response interference is induced by this special unit.
Internal switching on the low noise Power Supply from 115VAC or 230VAC to drive the VU meter circuits, Headphones and lights (you provide the 3 pin Euro Lead).
Supplied with an internal PSU - 980.00 + 40.00 Insured Postage in the UK - 60.00 to Europe - 110.00 to the USA
For Further Information: Click Here
Pre-Selector-4309

Custom Built Old School / Modern Analogue RIAA PreAmplifier
NEW The Baldwin HiFi MMRIAA-B1005 External RIAA and Bluetooth PreAmplifier.
Mains powered - a self contained MM RIAA Turntable PreAmplifier.
This unit also includes a switchable Hi-Res Bluetooth Receiver so that your phone can take charge too!
RIAA input impedance = 47kOhms, output impedance = 47kOhms, Input Sensitivity = 2-3mV, Output = 700mV. A super mains powered RIAA designed to bring out all the traits of your MM Cartridge.
The Hi-Res Bluetooth Receiver is very sensitive - up to 30 metres!
External dimensions: 102mm (4 1/8") wide x 50mm (2") High x 189mm (7 1/2") deep.
Price - 139.00 + 5.80 Postage in the UK - 12.00 to Europe
RIAA

Custom Built Old School Design / Modern Analogue Power Amplifiers
Tech Specs all units:
220VAC-240VAC 50Hz Mains as standard
NEW - 110VAC 60Hz units available to order
Signal to noise Ratio: 405c = 96dB - L10 = 110dB
Distortion: less than 0.01%
Frequency Response: 20Hz to 20KHz + - 0.5dB
Baldwin HiFi Power Amplifier Setups and Fusing Protection
Solid - POWERFUL - Clean - Hum Free - Hiss Free Hi Fi Sounds

The Baldwin HiFi HP1005 Stereo Headphone Amplifier
Mains driven 220/240VAC (115VAC versions available) this unit has 2 sets of RCA Phono connections and a 3.5mm stereo Jack socket on the rear so you can connect from your HiFi or Headphone outlet on Computers etc).
2 x 1/4" Stereo Jack sockets, power switch and quality volume control on the front.
750mWatt RMS per channel - will drive headphones from 4 Ohms to 10kOhms perfectly.
Beautiful slim case - External dimensions: 102mm (4 1/8") wide x 50mm (2") High x 189mm (7 1/2") deep.
Price: 189.00 + 5.80 Postage in the UK - 12.00 to Europe - 30.00 to the USA
HP1005
The Baldwin HiFi 405c - 120 Watts RMS per Channel into 4 Ohms
Separate matching PSU Case connected to the Power Amplifier Case via a HD Umbillical Connector.
This is the very popular "Darth Vader" Twin Meter Quad 405c I make. Branded - Baldwin 405C.
Hand Built in West Sussex - this is a 220/240VAC version of the Quad 405 Stereo Power Amplifier. 120 Watts of clean power per channel. The famous QUAD 405 Current Dumping circuitry is employed in this Amplifier.
Each unit is made to order - 4 days build time prior to despatch.
Beautiful Dual matching cases - each 217mm (8 1/4") wide x 70mm (2 3/4") high and 257mm (10 1/8") deep.
Price: 729.00 + 55.00 Insured Postage in the UK - 90.00 to Europe - 140.00 to the USA
For Further Information: Click Here
To view 405c Customer Reviews Click Here
To view Customer Feedback Click Here
405c
The Baldwin HiFi 405c Deluxe - 120 Watts RMS per Channel into 4 Ohms
This version of the 405c has the additional facility of monitoring both the Amplifier Output (standard) and the signal source. As with the standard model, you can sit the units side to side in your HiFi stack (same width as a CD player).
Hand Built in West Sussex - this is a 220/240VAC version of the Quad 405 Stereo Power Amplifier. 120 Watts of clean power per channel. The famous QUAD 405 Current Dumping circuitry is employed in this Amplifier.
Each unit is made to order - 4 days build time prior to despatch.
Beautiful Dual matching cases - each 217mm (8 1/4") wide x 70mm (2 3/4") high and 257mm (10 1/8") deep.
Price: 799.00 + 55.00 Insured Postage in the UK - 90.00 to Europe - 140.00 to the USA
For Further Information: Click Here
To view Customer Feedback Click Here
405c Deluxe
The Baldwin HiFi L10 - 350 Watts RMS per Channel
Power Each Channel = 100W 8 ohm, 200W 4 ohm, 350W 2 ohms. Heavy, Clean Power. Separate PSU Block and Matching Power Amp Case.
Hand Built in West Sussex - Each unit is made to order - 4 days build time prior to despatch.
Beautiful Dual matching cases - each 217mm (8 1/4") wide x 70mm (2 3/4") high and 257mm (10 1/8") deep.
Price: 765.00 + 55.00 Insured Postage in the UK - 90.00 to Europe - 140.00 to the USA
For Further Information: Click Here
To view Customer Feedback Click Here
L10 Standard
The Baldwin HiFi L10 Deluxe - 350 Watts RMS per Channel
Power Each Channel = 100W 8 ohm, 200W 4 ohm, 350W 2 ohms. Heavy, Clean Power. Separate PSU Block and Matching Power Amp Case.
Hand Built in West Sussex - Each unit is made to order - 4 days build time prior to despatch.
This version of the L10 has the additional facility of monitoring both the Amplifier Output (standard) and the signal source.
Beautiful Dual matching cases - each 217mm (8 1/4") wide x 70mm (2 3/4") high and 257mm (10 1/8") deep.
Price: 843.00 + 50.00 Insured Postage in the UK - 90.00 to Europe - 140.00 to the USA
For Further Information: Click Here
To view Customer Feedback Click Here
L10 Deluxe
The Baldwin HiFi L10 Mono Block - 350 Watts RMS - Dedicated PSU for Crescendo Power
Power = 100W 8 ohm, 200W 4 ohm, 350W 2 ohms. Heavy, Clean Power. Separate PSU Block and Matching Power Amp Case.
Dedicated Power Supply ensures huge reserves for those transient moments.
Hand Built in West Sussex - Each unit is made to order - 6 days build time for 2 sets of PSU & Amplifier Modules prior to despatch.
Beautiful Dual matching cases - each 217mm (8 1/4") wide x 70mm (2 3/4") high and 257mm (10 1/8") deep.
405cMB Price for 2 sets: 1,236.00 + 90.00 Insured Postage in the UK - 160.00 to Europe - 200.00 to the USA
L10MB Price for 2 sets: 1,272.00 + 90.00 Insured Postage in the UK - 160.00 to Europe - 200.00 to the USA
For Further Information: Click Here
To view Customer Feedback Click Here
L10 MB
The Baldwin HiFi L10 Mono Block Deluxe - 350 Watts RMS - Dedicated PSU for Crescendo Power
Power = 100W 8 ohm, 200W 4 ohm, 350W 2 ohms. Heavy, Clean Power. Separate PSU Block and Matching Power Amp Case.
Dedicated Power Supply ensures huge reserves for those transient moments.
Hand Built in West Sussex - Each unit is made to order - 6 days build time for 2 sets of PSU & Amplifier Modules prior to despatch.
The Deluxe model allows switching the VU Meters to monitor the Input Source or the Power Output.
Beautiful Dual matching cases - each 217mm (8 1/4") wide x 70mm (2 3/4") high and 257mm (10 1/8") deep.
405cMB Price for 2 sets: 1,314.00 + 90.00 Insured Postage in the UK - 160.00 to Europe - 200.00 to the USA
L10MB Price for 2 sets: 1,350.00 + 90.00 Insured Postage in the UK - 160.00 to Europe - 200.00 to the USA
For Further Information: Click Here
L10 MB Deluxe
The Baldwin HiFi CB4309 Centre Bass Triple Power Amplifier plus extra Heavy Duty PSU in separate case
An unusual Centre Bass HiFi Power Amplifier with 2 x Stereo independant HiFi Power Amplifier Drives
Stereo Channels: 2 x 405c Amplifiers delivering 120 Watts per channel with front Volume Control & meters.
Centre Bass L10 Amplifier Power 350W into 2 ohms with independant Front Volume Control & meter.
Dedicated Power Supply ensures huge reserves for those transient moments.
You may drive the Centre Bass Amp directly from a dedicated PreAmp or, via the rear switch, combine the standard 2 stereo channels into the Bass section.
Hand Built in West Sussex - Each unit is made to order - 4 days build time for Both the triple Amplifier Module and separate PSU.
Beautiful Designer Case - 430mm (17") wide x 90mm (3 1/2") high and 308mm (12.2") deep.
Heavy Duty PSU Case - 228mm (9") wide x 90mm (3 1/2") high and 219mm (8 3/4") deep.
Price 1198.00 + 90.00 Insured Postage in the UK - 160.00 to Europe
For Further Information: Click Here
This unit is newly designed - I do not believe any other manufacturer has anything so good! Call Paul for more information.
CB4309 Triple Amplifier
CB4309 Triple Amplifier
The Baldwin HiFi BW4309 Bi-Amp Quadruple Power Amplifier plus extra Heavy Duty PSUs
An unusual Concept Amp to be built over the Xmas Period for a Client.
Stereo Channels: 2 x 405c Amplifiers delivering 120 Watts per channel with front Volume Controls & meters.
2 x Stereo Bass L10 Amplifier Power 350W into 2 ohms with independant Front Volume Controls & meters.
Dedicated Power Supply Units ensure huge reserves for those transient moments. (No Frequency filtering employed).
You may drive the Quadruple Amp directly from a dedicated Stereo PreAmp or, via the rear switch, drive each Amp independantly from a suitable Bi-Wire PreAmp.
Hand Built in West Sussex - Each unit is made to order - 5 days build time for Both the Quad Amplifier Module and separate PSUs.
Beautiful Designer Case - 430mm (17") wide x 90mm (3 1/2") high and 308mm (12.2") deep.
2 x Heavy Duty PSU Cases - 217mm (8 1/4") wide x 70mm (2 3/4") high and 257mm (10 1/8") deep.
Price 1,499.00 + 90.00 Insured Postage in the UK - 160.00 to Europe - 210.00 to the USA
For Further Information on the Amp Specs: Click Here
This unit is newly designed - I do not believe any other manufacturer has anything so good! Call Paul for more information.
BW4309 Bi-Amp Amplifier
BW4309 Bi-Amp Amplifier
The Baldwin HiFi SPM2207 - a Power Bridge Monitor for Amplifiers - AC Filtering, Speaker Protection, Headphones.
Designed to sit between your Amplifier and up to 2 sets of speakers (switchable) this is a plugin Meter Bridge Module which has Old School VU Meters with a sensitivity 20dB switch for low level monitoring.
The speakers are protected with Soft Start and Close circuitry (no thumps) - Each output channel is monitored for DC. The Amplifier benefits from being powered through the inbuilt high power AC filtering system (no more appliance switching noises). The amplifier only 'sees' speaker set 1 impedance although the switchable speaker set 2 are in parallel - ideal for Transistor driven amplifiers into low Ohm speakers.
Direct Drive Headphone Sockets x 2 for that good listening quality.
External dimensions are 215mm (8.4") Wide x 70mm (2.75") High x 230mm (9.0") Deep.
With Internal PSU - 440.00 + 25.50 Postage in the UK - 50.00 to Europe
SPM2207
SPM2207

Custom Built Regulated Linear Low Noise DC Power Supplies
All units have Variable Output between 5V & 32VDC, the adjustment is undertaken by rotating the internal Potentiometer.
Unit is pre-set to your requirement before despatch.
Positive or negative tip 2.1mm DC Rocco Outlet as required.
Note: I provide a short 0.5M DC connection cable with 2.1mm x 5.5mm DC Rocco connectors at each end.
I manufacture wonderful PSUs yet cannot supply adaptors for the myriad of possible DC connector sizes that your unit may use. These adaptors from 2.1mm are readily available on Ebay.
All DC PSUs are now available with an additional rear toggle switch to allow "Floating Ground" or "True Mains Ground" Earthing delivery to the Target unit. This allows custom switching to alleviate possible DIGI Equipment Ground Loops.
All Power Supplies are available in 110/120VAC and 220/240VAC input Versions

For a quick read of one of my client's Turntable Problems (now resolved by a specially built dual rail Baldwin HiFi PSU 30VA) - please Click Here

The Baldwin HiFi PSU30VA DC PSU
Hand Built in West Sussex - this is a 30W Output variable DC Voltage low noise PSU.
This Unit has AC filtering on the front end helping to cut out mains interference.
Output Current Limitations:
5V = 2 Amps, 12V = 1.5 Amps, 15V = 1.2 Amps, 24V = 1 Amps
External dimensions: 102mm (4 1/8") wide x 50mm (2") High x 189mm (7 1/2") deep.
Price: 139.00 + 5.80 Postage in the UK - 12.00 to Europe
For Further Information: Click Here
PSU30VA
The Baldwin HiFi PSU30VATT Turntable Vernier DC PSU
Hand Built in West Sussex - this is a 30W Output variable DC Voltage low noise PSU.
Designed to drive Turntable DC Motors (any Brand) - the unit shown is specifically built for a Michell Tecnodec turntable Where the 33RPM needs a specific 9.34VDC. The Vernier control allows VERY fine Speed Control.
This Unit has AC filtering on the front end helping to cut out mains interference.
Output Current Limitations:
5V = 2 Amps, 12V = 1.5 Amps, 15V = 1.2 Amps, 24V = 1 Amps
External dimensions: 102mm (4 1/8") wide x 50mm (2") High x 189mm (7 1/2") deep.
Price: 189.00 + 6.80 Postage in the UK - 16.00 to Europe
For Further Information: Click Here
For Construction Information: Click Here
PSU30VA Vernier Control
The Baldwin HiFi PSU30VADTT Dual Rail Turntable Vernier DC PSU
Hand Built in West Sussex - this is a 30W Output variable DC Voltage low noise PSU.
Designed to drive 2x Turntable DC Motors (any Brand) independantly.
It can also be used to drive a single DC motor Turntable and an RIAA PreAmplifier.
The Vernier control allows VERY fine Speed / Power Control.
This Unit has AC filtering on the front end helping to cut out mains interference.
Output Current Limitations:
5V = 2 Amps, 12V = 1.5 Amps, 15V = 1.2 Amps, 24V = 1 Amps
External dimensions: 102mm (4 1/8") wide x 50mm (2") High x 189mm (7 1/2") deep.
Price: 219.00 + 6.80 Postage in the UK - 18.00 to Europe
For Further Information: Click Here
For Construction Information: Click Here
PSU30VA Vernier Control
The Baldwin HiFi PSU50VA DC PSU
Hand Built in West Sussex - this is a 50W Output variable DC Voltage low noise PSU.
This Unit has AC filtering on the front end helping to cut out mains interference.
Output Current Limitations:
5V = 3.2 Amps, 12V = 2.0 Amps, 15V = 1.6 Amps, 24V = 1.2 Amps
External dimensions: 102mm (4 1/8") wide x 50mm (2") High x 189mm (7 1/2") deep.
Price: 159.00 + 5.80 Postage in the UK - 12.00 to Europe
For Further Information: Click Here
To view Customer Feedback Click Here
PSU50VA
The Baldwin HiFi PSU300VA DC Single Rail PSU
Hand Built in West Sussex - this is a 300W Output variable DC Voltage low noise PSU.
Output Current Limitations:
5V = 15.0 Amps, 12V = 10.0Amps, 15V = 8.0Amps, 24V = 6.0Amps, 30V = 5.0Amps
External dimensions: 217mm (8 1/4") wide x 70mm (2 3/4") high and 257mm (10 1/8") deep.
Price: 295.00 + 25.00 Postage in the UK - 38.00 to Europe
For Further Information: Click Here
PSU300VA
The Baldwin HiFi PSU302VA DC Dual Rail PSU
Hand Built in West Sussex - this is a dual 300W Output variable DC Voltage low noise PSU.
The user is able to fine tune the output Voltage by using the multiturn vernier pots and in-built Voltmeter.
Output Current Limitations:
5V = 15.0 Amps, 12V = 10.0Amps, 15V = 8.0Amps, 24V = 6.0Amps, 30V = 5.0Amps each independent Output
External dimensions: 217mm (8 1/4") wide x 70mm (2 3/4") high and 257mm (10 1/8") deep.
Price: 380.00 + 25.00 Postage in the UK - 38.00 to Europe
For Further Information: Click Here
PSU302VA
The Baldwin HiFi 6 x Adjustable Rail Pedals OFF-Stage Guitar Pedals DC PSU
Hand Built in West Sussex - this is a 6 Rail @ 1.5Amps per Rail DC low noise PSU that sits Off Stage thus keeping High Voltage Mains power off stage. Connected by an Umbillical Heavy Duty Cable to the ON-Stage Baldwin HiFi Pedals Stomp DC PSU Distributor Box.
Each Rail is adjustable from 5VDC to 32VDC - Very adaptable for the majority of Pedal Box requirements.
External dimensions OFF-Stage Unit: 217mm (8 1/4") wide x 70mm (2 3/4") high and 257mm (10 1/8") deep.
External dimensions ON-Stage Unit: 100mm (4") wide x 60mm (2 1/4") high and 125mm (5") deep.
Supplied with 6 x DC Pedals connection cables (2.5mm x 5.5mm) and an Umbillical of your choice.
Price for Off-Stage and On-Stage Modules: 550.00 + 20.00 Postage in the UK - 38.00 to Europe
5 Metre Umbillical Cable: 25.00
8 Metre Umbillical Cable: 33.00
10 Metre Umbillical Cable: 38.00
For Further Information: Click Here
Pedals PSU
Pedals PSU Stomp

Custom Built Linear Low Noise AC Power Filters
Unit is pre-set to your requirement before despatch.
2.1mm (tip) x 5.5mm DC Rocco Outlet.
0.5 Metre x 2.1mm tip x 5.5mm Cable supplied
Note: I provide a short 0.5M DC connection cable with 2.1mm x 5.5mm DC Rocco connectors at each end.
I manufacture wonderful PSUs yet cannot supply adaptors for the myriad of possible DC connector sizes that your unit may use. These adaptors from 2.1mm are readily available on Ebay.
All Power Supplies are available in 110/120VAC and 220/240VAC input Versions
The Baldwin HiFi PSUAC30VA AC Filter
Hand Built in West Sussex - this is a 30W Output Fixed AC Voltage Output Filtered PSU.
Available in Various Output Voltage Versions: AC 9V, 12V, 15V, 18V, 24V or 30V (fixed).
Output Current Limitations:
5V = 2 Amps, 12V = 1.5 Amps, 15V = 1.2 Amps, 24V = 1 Amps
External dimensions: 102mm (4 1/8") wide x 50mm (2") High x 189mm (7 1/2") deep.
Price: 139.00 + 5.80 Postage in the UK - 12.00 to Europe
For Further Information: Click Here
PSUAC30VA

Custom Built Linear Low Noise AC Mains Power Filters
All Power Filters are 110/120VAC and 220/240VAC input Versions
The Baldwin HiFi 2 way Heavy Duty Mains AC Filter
Hand Built in West Sussex - this is an 8 Amp per Output AC Mains Filter.
Relay Switched Power. 2 IEC Outlets (male to female interconnect cables supplied) - ideal for powering heavy duty units like noisy Digital Equipment and Power Amplifiers.
Limit those interruption spikes made by other equipment turning on/off on the same mains phase.
Output Current Limitations:
8 Amps per Filtered Output
External dimensions are 210mm (8.25") Wide x 58mm (2.25") High x 180mm (7.25") Deep.
Price: 250.00 + 20.00 Postage in the UK - 38.00 to Europe
For Further Information & Feedback: Click Here
Mains Filter 2
The Baldwin HiFi 4 way Heavy Duty Mains AC Filter
Hand Built in West Sussex - this is an 8 Amp per Output AC Mains Filter.
Relay Switched Power. 4 IEC Outlets (male to female interconnect cables supplied) - ideal for powering heavy duty units like those within a Hi Fi Stack to keep those nasty Mains switching 'pops' at bay. Also Great for stopping Digital Equipment from giving you grief!
Limit those interruption spikes made by other equipment turning on/off on the same mains phase.
Output Current Limitations:
8 Amps per Filtered Output
External dimensions are 210mm (8.25") Wide x 58mm (2.25") High x 180mm (7.25") Deep.
Price: 420.00 + 20.00 Postage in the UK - 38.00 to Europe
For Further Information & Feedback: Click Here
Mains Filter 4 Way

Custom Built Linear Obscure Items not made ANYWHERE ELSE!
4 Way Speaker Switch / Sharer - 800 Watts switching
The Baldwin HiFi SP4 1707 Loudspeaker switchbox.
If you have a transistor style Power Amplifier you will know that too many loudspeakers plugged in at the same time will cause that amplifer to overheat and blow up.
The new SP4 (also available in an 8 way version) uses loudspeaker crossover technology to enable you to listen to as many loudspeaker sets as you like without affecting the frequency range available. The amplifier will 'see' a fixed impedance of Spkr set 1 or the dummy load only.
Listen to set 1 (directly coupled) and/or switch in up to 3 more sets (DeCoupled) at the same time to tune your system to the room acoustics as you need without the fear of blowing your power amplifier up. 20Hz-20kHz audio is passed without interference.
It can also,of course, be used as a Speaker comparitor too.
Wider Cased 8 Switch versions are also available - contact Paul to discuss your specific requirements.
Price for the standard SP4 1707: 329.00 + 15.00 Postage in the UK - 30.00 to Europe
For Further Information: Click Here
SP4 1707
SP4




Special Amplifier & Speaker A/B Switch - Valve Amps & Solid State - 800 Watts switching
I was recently commissioned to make a simple Stereo Amplifier/Loudspeaker switch box. The difference to the multitude of A/B switch boxes available today is that this new switcher must allow Valve Amplifiers and/or Transistor Amps to be used transparently.
As you will know, if you leave a Valve Amplifier without a set of loudspeakers connected then the output stage will destroy itself causing an extensive repair bill.
Wish List:
2 x stereo Amplifiers - Valve and/or Solid State transparent
2 x sets of stereo loudspeakers
Common Earth for all negative amplifier and loudspeaker connections
Each Amplifier can drive speakers 1 or speakers 2
Each Amplifier can drive speakers 1 and speakers 2 without changing the impedance load to the amplifier
Each Amplifier has 2 x 4 Ohm dummy loads connected if it is switched out of circuit
There must be no switching noises through the loudspeakers
The switch box must be musically transparent.
The Switch Box should be capable of switching up to 10 Amps (1KW) per channel.
It should be IMPOSSIBLE to switch 2 x Amplifiers back to back!
Designing such a simple yet complex circuit has been a challenge. Free standing push button switches and toggle switches cannot safely take the power! Relay drive is the best solution - so that the controlling switches can be miniature toggles. A power supply to drive the relays is required but, should this fail - then the amplifiers must see the dummy loads by default.
External Dimensions: 226mm (9") Height 70mm (2.75") Depth 271mm (10.75").
"Darth Vader" Black Anodised fronts
Despatched within 4 days from order - the switch box is Hand Built from stock components.
3 pin IEC Euro Mains Cable (kettle lead) not supplied.
Wider Cased Bi-Wire versions are also available - contact Paul to discuss your specific requirements.
Price for the standard 2 x 2: 369.00 + 30.00 Postage in the UK - 50.00 to Europe
Price for a Bi-Wire 4 x 2 or 4 x 4: Please contact Paul to discuss your specific requirements.
For Further Information: Click Here
Switch 2 x 2
Switch 2 x 2




Switch Bi-Wire 4 x 2
Switch 4 x 2
Studer A101 Clone Op Amp Chip - New - Ready Made to Plug-In, A80 Op Amp
Brand NEW - Hand built in West Sussex - that elusive Studer A101 OP Amp chip you cannot seem to buy any more.
Having repaired a lot of Studer and Revox Tape machines - I realised that the Hybrid A101 Op Amp Chip is used extensively.
Searching the Internet has proven fruitless to purchase replacement units - so I decided to manufacture a replacement Clone unit.
Gone are the flimsy wire ends - replaced by 2 rows of sill connectors. Gone is the dreaded Tantalum capacitor - replaced by a mini 50V electrolytic - more reliable and less noisy.
Buy with confidence - these boards are tried and tested!
Price Each: 19.00 + free Postage in the UK - 3.50 to Europe
Price for 5 Units: 84.00 + free Postage in the UK - 3.50 to Europe
For Further Information: Click Here
Studer A101

Warranty:

All units manufactured by ReelAudio & Baldwin HiFi are guaranteed for a period of 12 months from the date of purchase.

Repairs & refurbishment on other manufactured equipment are guaranteed for a period of 3 months from completion.
Un-Associated Faults that may develop due to Aged Equipment or Misuse after the repair (including blown bulbs) are NOT within our Warranty remit yet can be repaired 'OUT OF WARRANTY' for an additional charge.
We reserve the right to decline work on equipment we deem unrepairable for whatever reason.
Normal Usage is implied by the words 'Guarantee' and 'Warranty'.

Click Here to view the Products & Pricing Page.

Machines left in the workshop for more than 6 Months and not collected will be disposed of as Storage Costs are high.

Any carriage costs are the responsibility of the Client

All Warranty repairs are undertaken on a return to base principle.
Any carriage costs are the responsibility of the Client

REELAUDIO MAKES NO WARRANTY, EITHER EXPRESS OR IMPLIED WITH RESPECT TO ANY PRODUCT, AND SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES FOR MERCHANTABILITY, NON-INFRINGEMENT AND FITNESS FOR ANY PARTICULAR PURPOSE. REELAUDIOS' SOLE OBLIGATION AND LIABILITY FOR PRODUCT DEFECTS SHALL BE, AT REELAUDIOS' OPTION, TO REPLACE SUCH DEFECTIVE PRODUCT OR REFUND TO BUYER THE AMOUNT PAID BY BUYER THEREFOR. IN NO EVENT SHALL REELAUDIOS' LIABILITY EXCEED THE BUYER'S PURCHASE PRICE. THE FOREGOING REMEDY SHALL BE SUBJECT TO BUYER'S WRITTEN NOTIFICATION OF DEFECT AND RETURN OF THE DEFECTIVE PRODUCT WITHIN NINETY (90) DAYS OF PURCHASE. THE FOREGOING REMEDY DOES NOT APPLY TO PRODUCTS THAT HAVE BEEN SUBJECTED TO MISUSE (INCLUDING WITHOUT LIMITATION STATIC DISCHARGE), NEGLECT, ACCIDENT OR MODIFICATION, OR TO PRODUCTS THAT HAVE BEEN SOLDERED OR ALTERED DURING ASSEMBLY, OR ARE OTHERWISE NOT CAPABLE OF BEING TESTED, OR IF DAMAGE OCCURS AS A RESULT OF THE FAILURE OF BUYER TO FOLLOW SPECIFIC INSTRUCTIONS.

IN NO EVENT SHALL REELAUDIO BE LIABLE TO THE BUYER OR TO ANY THIRD PARTY FOR ANY INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS, LOST SAVINGS, OR LOSS OF BUSINESS OPPORTUNITY) ARISING OUT OF OR RELATING TO ANY PRODUCT OR SERVICE PROVIDED OR TO BE PROVIDED BY REELAUDIO OR THE USE OR INABILITY TO USE THE SAME, EVEN IF REELAUDIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Units are Designed and Hand Built by:
Paul Baldwin
www.ReelAudio.Co.UK
Founder: BaldwinHiFi.Co.UK
12 Tack Lee Road
Yapton
Arundel
West Sussex
BN18 0HB - UK - Great Britain

Direct EMAIL: neverfinished0@hotmail.com
EBay Customers: Please use this direct email with your questions - the Ebay email system is now amazingly unusuable
and history has shown that either one of us can get banned for asking or responding to technical questions.

Tel: 01243 553231 - Mobile: 07858 089421
Please note: Paul may be contacted by telephone during his preferred admin period of between 5pm and 8pm. Thankyou.

Payment for Goods: PAYPAL Account: neverfinished0@hotmail.com
Please specify what you are buying within the PAYPAL Message Area when Making a Payment.
Back   Previous Screen Contact the WebMaster Contact Us
An Average of 120 Hits per day since 12th November 2012